SDM Fabricating Green Fiber Optic S&W Revolver Front Sight (DX/Interchangeable)
SKU SDM-DX-Gr
Are you looking for ways to enhance your Smith & Wesson K/L/N Frame Revolver sharp-shooting performance capabilities, both quickly and effectively? If so, TK Custom has the ideal SDM Fabricating Green Fiber Optic S&W Revolver Front Sight for you. Gain pinpoint accuracy over your shots and acquire your targets faster with this SDM Fabricating green fiber optic front sight!
A must-have for shooters that want to upgrade their S&W Revolver’s sight, this green fiber optic sight provides a clear and distinctive green dot that won’t dull or corrode and that you can lock on to at full tilt in any light conditions. Augment your factory S&W revolver sight’s reduced performance capabilities with this SDM Fabricating Green Fiber Optic Front Sight, and stay ready with an accurate aim every time you take a shot! With this new fiber optic sight, you can lift your performance to new heights.
Installing this SDM Fabricating green fiber optic S&W revolver front sight couldn’t be easier with a drop-in installation and just a rudimentary level of gunsmithing ability, although fitting with precision is paramount to getting the performance enhancement you're looking for. It fits all K/L/N Frame Revolvers, including models 610, 686 Performance Center, 686+ Performance Center, 627 Performance Center, 625 Performance Center, 325 Performance Center, 986, Performance Center M&P R8. To get started, simply pull back on your S&W Revolver’s current DX sight against a spring action and lift the nose in an upward direction to pull the sight out. Then, take the front nose of your SDM Fabricating green fiber optic front sight, place into the slot and pull back against the plunger while your press the top down into place. Follow along on our Youtube channel for step-by-step guidance, no tools or gunsmithing are required!
Expertly constructed with high performance in mind, this SDM Fabricating green fiber optic front sight’s blade is EDM wire cut from ground, flat stock to ensure clean edges and has been engineered for superb fitment. They are then matte-finished for excellent contrast and glare resistance. A .250” blade height is used to perfectly match standard factory loads or high-performance hunting ammo. Only the best will do for the USPSA Champion TK Custom Team Members.
Proudly made in the USA, our SDM Fabricating green fiber optic S&W revolver front sight empowers you with the confidence and authority experienced by National Championship Level Pro Shooters. By improving the short, long and fast shooting ability of your S&W K/L/N Frame Revolver, you can feel more confident with every shot. Whether you're shooting in the searing intensity of competition or simply practising down at the range, our interchangeable/DX SDM Fabricating green fiber optic S&W revolver front sight will help you hit your intended targets with more success and less effort.
The U.S. Arms Export Control Act (22 U.S.C. Section 2778), the International Traffic in Arms Regulations (22 C.F.R. Chapter I, Subchapter M, Parts 120-130), the U.S. Export Administration Act of 1979 (50 U.S.C. App. 2401-2420) and the Export Administration Regulations (15 C.F.R. Sections 730-774) prohibit the shipping of this item outside of the United States.
Free Shipping on orders over $250.00 in the USA only!
Smaller orders less than $250.00 are $9.95 for shipping.
No Free Return Shipping with Labor
No International Shipping, except to Canada.
$35.00
Canada - Priority Mail / NO Tracking Out side of USA
FREQUENTLY ASKED QUESTIONS
-
Federal or Remington & others makes works the best with the .025 thick Full Moonclips, which fit all the .38/357 standard moonclip. They allow the cartridges to have some movement or wiggle so that they will fall right into the chambers once properly aligned. Winchester brass does not work at all as the groove width is too tight/small.
-
Use this text block to discuss some commonly asked questions like shipping and returns, sizing, warranties, or product and company details.
-
There is no SAAMI specifications for the extractor groove and each manufacturer makes them as they want. The following list gives you a great example. This is why the diameter size of the brass is critical to proper loading, unloading and fitment. Cartridge diameter too big and moonclip too small causes the moonclip to bend. The cartridge should rotate within their respective place and wobble slightly when all cartridges are loaded.
-
If you are unsure about how to use moon clips for your revolver, or wondering which moon clip to use, call us. See the Contact menu tab.
GOOGLE REVIEWS
4.9 from over 1095 reviews