Reduced Power Spring Kit & Extended Firing Pin — S&W 617 .22LR
SKU: 200012
Reduced Power Spring Kit & Extended Firing Pin — S&W 617 .22LR
A lighter, smoother double-action pull for the S&W 617 in .22LR, with the extended firing pin included so your rimfire ignition stays reliable. The 617 is a favorite for practice and rimfire competition, and a lighter pull makes a long day on the trigger easier and more consistent shot to shot.
Pull weights: with Federal Champion ammo, around 7.5 lb. With other rimmed brands, around 9.5 lb.
Important: dry fire is fine with snap caps or a fired case on a .22LR revolver. That is how to practice trigger pull safely. Avoid dry firing on an empty chamber with the extended pin installed, since on a rimfire gun the pin can strike the edge of the chamber and damage the cylinder.
Important: the firing pin and springs are a matched set, designed and tested to install together.
What is in the kit: a reduced power mainspring and two rebound springs to lighten the double-action pull, the extended firing pin and firing pin spring to keep the rim getting a clean, reliable strike at the lighter weight, and an adjustable strain screw, with an Allen wrench to set its depth and blue Loctite to lock it in place.
What is in the box:
-
Reduced power mainspring -
Rebound spring, 11 lb
-
Rebound spring, 12 lb
-
Extended firing pin
-
Firing pin spring
-
Adjustable strain screw
Free Shipping on orders over $250.00 in the USA only!
Smaller orders less than $250.00 are $9.95 for shipping.
No Free Return Shipping with Labor
No International Shipping, except to Canada.
$35.00
Canada - Priority Mail / NO Tracking Out side of USA
Bundle Discounts
Save more when you purchase compatible products together with TK Custom Bundles.
Build Your Bundle & Save
Save 10%
Reduced Power Spring Kit & Extended Firing Pin — S&W 617 .22LR
$44.95
Internal Lock Plug Replacement Kit — S&W Revolver
$39.95
Extended Cylinder Release — S&W K/L/N Frame — Long
$84.95
Ansac Speedloader
$59.95
Bundle Total
Ships together
Free returns
Secure checkout
FREQUENTLY ASKED QUESTIONS
-
Federal or Remington & others makes works the best with the .025 thick Full Moonclips, which fit all the .38/357 standard moonclip. They allow the cartridges to have some movement or wiggle so that they will fall right into the chambers once properly aligned. Winchester brass does not work at all as the groove width is too tight/small.
-
Use this text block to discuss some commonly asked questions like shipping and returns, sizing, warranties, or product and company details.
-
There is no SAAMI specifications for the extractor groove and each manufacturer makes them as they want. The following list gives you a great example. This is why the diameter size of the brass is critical to proper loading, unloading and fitment. Cartridge diameter too big and moonclip too small causes the moonclip to bend. The cartridge should rotate within their respective place and wobble slightly when all cartridges are loaded.
-
If you are unsure about how to use moon clips for your revolver, or wondering which moon clip to use, call us. See the Contact menu tab.
GOOGLE REVIEWS
4.9 from over 1095 reviews
