MACHINING SERVICES - OTHER BRANDS
MACHINING SERVICES - OTHER BRANDS 2
MACHINING REVOLVER CYLINDERS TO ACCEPT MOON CLIPS AND Other CONVERSIONS.
CYLINDER MACHINING / MANY MORE REVOLVERS CAN BE DONE.
CALL WITH QUESTIONS. (SOME CYLINDERS: CHIAPPA RHINO, COLT, SCHOFIELD & FOREIGN MODEL COPIES)
Video demo on ResourcesMachining your Schofield 45LC cylinder to shoot .45 acp.
You can still shoot the original rimmed cartridge caliber without moonclips, just as you do before the modification.
| Prices | |
|---|---|
| machine & chamfer cylinder |
$200 + Return Shipping |
Rechambering your Schofield .38/357 cylinder to shoot 9mm:
Rechambering to Factory Spec ammo only. No Reloaded ammo.
When rechambered to 9mm the cylinder will still shoot 38 SPL or 357 with or without the proper moonclip.
Video of 9mm Rechambering| Prices | |
|---|---|
| Rechamber cylinder, machine & chamfer cylinder |
$350 + Return Shipping |
Note:
Our work on cylinders rechambered to 9mm are LIMITED to our customer's using standard 9mm ammo or low pressure reloads, which are 34,000 - 35,000 psi chamber pressure or less. Same chamber pressures apply to firing of .38 SPL & .357 Mag. Examples of FACTORY Brands are: Winchester, Federal & Remington.
Absolutley NO 9mm Nato, 9mm +P or 9mm +P+, all which are far beyond the 34,000 - 35,000 psi chamber pressure our conversion is intended for. Usually 38,500 psi, which WILL Stick!
If you try to use these high pressure ammo, you will experience cases sticking in all chambers.
We cannot warranty our work, if you disregard our warning/notice on high pressure ammo.
When rechambered to 9mm the cylinder will still shoot NON-HIGH Pressure ammo, 38 SPL or 357 Mag with or without the proper moonclip.
Reloaded range brass, with the unsupported barrel chamber bulge, will not resize properly and results in inferior ammo for use in this conversion!
Fill out the (Work Order) and ship us the revolver cylinder assembly, payment info or have us call you when the work is done.
* In Shop time for machining cylinders is now 7-10 business days * Except *9mm Conversions*. Plus transportation both ways.
* Payment can be by Credit Card or Certified Funds
Ship to:
TK Custom
503 N Church St / PO Box 333
Thomasboro, IL 61878
9 AM - 12 Noon
Monday - Friday
Saturday By Appointment Only!
Central Standard Time
E-Mail: info@tkcustom.com
Shop: 217.643.2002
Just send the cylinder assembly, NO gun.
To machine your revolver's cylinder we need the COMPLETE cylinder assembly. DO NOT disassemble as we will do that.
(Smith and Wesson Model 640 Machined & Chamfered with a Haas CNC)
Revolver Cylinder Machining / Many more revolvers can be done. Call with questions. (Some Colt, Rhino, Schofield & Foreign Model Copies)