Pinned Front Sight Pin & Drill — S&W Revolver
Pinned Front Sight Pin & Drill — S&W Revolver
A front sight installation kit for S&W revolvers from TK Custom, with the roll pin and the correctly sized drill bit you need to install a pinned front sight. A pinned front sight is held in place by a small cross pin, and putting one on means drilling the sight and pinning it to the barrel. This kit gives you the right pin and the matching drill bit so the job is done to the correct dimensions.
Why the right drill bit matters: a pinned front sight has to sit at the correct height and line up square with the bore, and the pin hole has to be the right diameter so the pin holds without play. Using the matching drill bit keeps the hole sized correctly, so the sight pins in solid and stays put under recoil. A hole that is off can leave the sight loose or sitting crooked, which shows up downrange as a point of impact that wanders.
Who it is for: gunsmiths and experienced builders installing or replacing a pinned front sight on an S&W revolver.
Key Features
-
Includes the roll pin and the matching drill bit -
Correct dimensions for an S&W pinned front sight install
-
Keeps the pin hole sized right so the sight holds under recoil
-
Machined and supplied by TK Custom
Installation note: this is a drilling and pinning job, best handled by a gunsmith or an experienced builder. Measure and confirm your sight and barrel setup before you drill.
TK Custom does S&W revolver work every day, and we supply this kit to the same standard we hold on our own bench.
Fitment
For installing a pinned front sight on S&W revolvers.
Specs
-
Includes: roll pin and matching drill bit
-
For: S&W revolver pinned front sight installation
-
Made in USA
Guarantee
Best fitment, quality, and durability in the industry, or your money back.
Free Shipping on orders over $250.00 in the USA only!
Smaller orders less than $250.00 are $9.95 for shipping.
No Free Return Shipping with Labor
No International Shipping, except to Canada.
$35.00
Canada - Priority Mail / NO Tracking Out side of USA
Complete The Setup
Save 10%
Pinned Front Sight Pin & Drill — S&W Revolver
$14.95
HiViz S&W Revolver Pinned Front Sight — Interchangeable Fiber Optic
$45.95
Extended Firing Pin Kit — S&W Centerfire Revolver
$19.95
Reduced Power Spring Kit — S&W K/L/N/X Frame Centerfire Revolver
$44.95
Bundle Total
Ships together
Free returns
Secure checkout
Configure this build
Your build
Pinned Front Sight Pin & Drill — S&W Revolver
Pinned Front Sight Pin & Drill — S&W Revolver
$14.95
Quantity× 1
Total$14.95
Included free
FREQUENTLY ASKED QUESTIONS
-
Federal or Remington & others makes works the best with the .025 thick Full Moonclips, which fit all the .38/357 standard moonclip. They allow the cartridges to have some movement or wiggle so that they will fall right into the chambers once properly aligned. Winchester brass does not work at all as the groove width is too tight/small.
-
Use this text block to discuss some commonly asked questions like shipping and returns, sizing, warranties, or product and company details.
-
There is no SAAMI specifications for the extractor groove and each manufacturer makes them as they want. The following list gives you a great example. This is why the diameter size of the brass is critical to proper loading, unloading and fitment. Cartridge diameter too big and moonclip too small causes the moonclip to bend. The cartridge should rotate within their respective place and wobble slightly when all cartridges are loaded.
-
If you are unsure about how to use moon clips for your revolver, or wondering which moon clip to use, call us. See the Contact menu tab.
GOOGLE REVIEWS
4.9 from over 1095 reviews
