Taurus 692 9mm Moon Clip Loading & Unloading Tool Bundle PLUS Clips

Excellent work and quick turn around. Highly recommend.

Just received my cylinder returned after getting the chamfer service. Top notch work. Superior service. Tom, Eli and everyone there are on top of their game. They are my go to business for anything revolver oriented. The best of the best. More news. I just received my Smith 929 from TK Custom and a could not be more pleased. I ordered the performance action job plus cylinder chamfering. What came back was a delight. An amazing trigger that will ignite Federal Primers and the cylinder accepts full moon clips smooth as silk. The folks a TK Custom are magicians. I can't recommend this business high enough. 6 out of 5 stars. Thanks Eli, Tom and everyone there.

What a fantastic organization. Eli and crew do amazing work. My revolver has the smoothest, most consistent trigger pull I’ve ever experienced on a revolver. They converted my cylinder to 9mm, chamfered and honed, then tuned the action. They are friendly and knowledgeable when explaining or answering questions. Their customer service is the best in the business. TKC is my go-to for quality parts and services. My next revolver will go to TKC when it’s time for some race tuning! Thank you TK!

Exceptional! Both in quality of work and service. I sent my 627 Pro cylinder in and a week later it is returned and ready! The conversation work is perfect! The chamfer job was perfect! I can drop moonclips from an inch or so above the cylinder, and it finds its own path and falls right in! I can now shoot 9mm, 38 Spl and 357 mag in the same revolver! The accuracy at 25 yards for all the calibers is great as well! POI and POA for all three are the same. I can highly recommend these guys for any work!

I have ordered parts and services from TK Customs. The experience has been great. They’ve got a streamlined website that allows most customers the modern cyber-shopping experience we all appreciate. The one time I did need to contact customer service, I goofed up on my end, TK fixed my error in minutes. They communicated the updated service request. My titanium cylinder went through their system fast and was back to my house in about 10 days shipping included. My mix up didn’t slow the process down. I was ready to face a delay, but none ever happened. If you want to take your wheelies to the next level this is the place for everything. Do it yourself or leave it to the experts.

I have sent numerous firearms parts to TK Custom over my 45 years of competitive shooting, I have always received outstanding service and the quality of work is the best I’ve ever seen. I have ordered revolver parts which are exactly as advertised and the quality is excellent.

I recently sent my L-Frame S&W to be fitted for moon clips and very pleased with the workmanship. It came with 5 moon clips and they even thru in an extra 5. I’m also very pleased with the turnaround time! Will definitely recommend this to others in my shooting group!!

The service was great .the turn around was very quick. I will use the company again

I recently purchased a S&W 929 from Eli and TK Custom. Extremely happy with the Revolver and especially the action work performed. It is very smooth, one of the smoothest revolvers I currently own, and the quality of the workmanship was outstanding. Just a beautiful trigger and action job. The entire transaction was seamless from the ease of ordering to the delivery. The finished product was completed ahead of schedule. TK kept in contact with me during the process and answered every question I had. They were easy to contact and returned every email and message I left. I highly recommend TK Custom for any revolver work that you need. I plan to utilize them for all my future revolver work.

Very fast service. Had my cylinder back in just over a week. Work looks perfect and functions the same. Even thru in some extra moon clips Larry Manning

I had my 686 milled for moon clips to be able to shoot 9mm, as my range mandates the use of their ammunition and 38/357 can get pricey. I am happy I did, this revolver was meant for 9mm and I can shoot twice as many for the money, fantastic workmanship, customer service and turn around time. Don't hesitate to turn a seldom used revolver into something you can shoot often and not feel bad about the cost. Thank you to Eli and company!

Super fast turn around and great service. Make sure you educate yourself on the compatibility of the brass you are using with the particular size of moon clips you use. I was not aware of the need to do this and had to sort through my stash to find cases that work.

These guys are the best I'm new to USPSA Revolver division and every email I sent them asking about recommendations and just random general questions they were always quick to respond, polite, and super informative. I sent my cylinder off to get chamfered and holy cow it is like night vs day with how easy it is to reload my moonclips into the cylinder now. They even sent me 5 free moonclips (which i had loaded prior to taking the picture) and a bunch of extra merch for no extra cost and all i asked for was a sticker. Shout out to Julian and Eli over at TK Custom yall are beyond phenomenal. I can't wait to do more business with you guys....Just bare with me and let me save up some more money to get another revolver to send to you guys. Thank you soooo much can't wait to start competing.

I am a repeat customer with TK Custom. I've had them chamfer and cut multiple cylinders for moon clips. The eight shot titanium cylinder for my S&W 327 snubby just came back today. Looks and works amazing now. The revolver is a performance centerpiece that lacked refinement and performance in accepting moon clips. Without a fight, it wouldn't take any combination of ammo and moon clips I would throw at it. I was not a happy camper. I decided within 20 min of owning the piece that the cylinder was coming out and going to TK for the cylinder chamfering job. It came back in quick turn around time in mint condition. All of my moon clips with any brand load, now fly right into the cylinder. It's night and day different. Above and beyond their workmanship, this time my cylinder came back in some world class packaging; trick box, stickers, ect.. When you get your parts back, you'll see the quality of the work they put into your parts. Thanks TK Costom, for taking good care of my "toys".

Great work, chamfer my 625 cylinder. Deluxe box on return and timely communication. Best place to get work done.

TK Custom has an easy to navigate website. I’d previously ordered two extended firing pins and this time I used their machining services on my titanium cylinder. It came back on time and exquisitely packaged. I also got a bonus of five moon clips. I’ve reassembled the revolver and the chamfering is wonderful. My loaded moon-clips drop right in. I would wholeheartedly recommend TK custom.

Excellent service. Had a M&P 340 chambered to 9mm. Runs awesome. They turned it around quick. This is the way. BTW the 124 gr. 9mm allegedly travels almost as fast as a 125 gr. 357 out of this package. When confirmed with a chronograph i will likely send in another j frame to be done. I didn’t feel that the 9mm standard pressure was quite as abusive as 38 after running it at the range the other day, but I’m still getting used to it. Nice package in the end. 3 calibers and the 9 is hopefully almost as fast without all the recoil. Chrono ordered today. Thanks Eli and company.

Outstanding job rechambering my 357 cylinder to 9mm. It still shoots 38's and 357. They said about two week turnaround, it took 2 weeks and 2 days. Free return shipping. Shot steel challenge last weekend, flawless.

This is my second cylinder 9mm moon clip job done by TK Custom. 1st to my smith and now my GP100. 10/10! Excellent work, a very professional company. Would recommend them to everyone.

Fastest turn around, top notch service. Wouldn’t think of anyone else!

I trusted TK Custom with the cylinder to my S&W Performance Center Model 327 for cylinder chamfering. I was having trouble utilizing the moon clips. It took entirely too long to load the pug. Well, I received my cylinder today. I installed the cylinder, grabbed a moon clip, and presto, it dropped right in. I was extremely pleased with TK Customs work. The money was well spent, and I would like to thank Mr. Eli Johnson for the excellent gunsmithing. I appreciate your efforts, Sir. AC

Outstanding job, converting my S&W m-10 (already cut for 38 moon clips) to 9mm! The fit is perfect, as advertised, and the 9mm clips are substantially stronger than the previous 38 clips. Tried several brands of brass; all worked. Some fit a little tighter, some a little looser, but they all worked. I'll hand load some lighter stuff, as the cylinder is proofed for 38 only. My m-640-1, almost unbearable in 357, will be going to TK for the same conversion soon! More power than 38's, less recoil than 357's. If you want the best for your revolver, TK is the way to go.

Great work!

I have purchased several parts for my S&W 66 all parts fit & worked perfectly. Recently had my cylinder chamber honed. What a difference rounds load and unload like butter. Customer service is top notched. Very few businesses go to the lengths that this company does to provide these kind of services. Will always be my go to for revolver parts and service.

great company to deal with. lost my rebound spring when I went to install it. called them and they took care of the problem immediately. great customer service and really good products they sell. will buy again from them when the need arises. cannot ask for more. I was not able to change the rebound spring but everything else. made my Kimber trigger much nicer and when I can change the rebound spring it will even be better. buy there kits and you will not be disapointed.

Great service and great work, quick turn around time. I will be using TK again in the future. Definitely recommend, I had a cylinder machined for moon clips and I have literally nothing negative to say. 10 out of 10.

Eli was awesome to work with, and came up with exactly what I wanted: a 686 PC 4" revolver with all the TK Custom touches to the trigger and action, a gold bead DX front sight, a short extended cylinder release and an 8.5 lb. DA trigger pull for defensive use. I couldn't be happier with it! Thanks!

I have been shooting since 1956 and in all those years have had quite a bit of experience with different vendors in the shooting community so I have had a bit of time to form an opinion on what to expect. I came across TK custom while doing an online search concerning a Ruger GP100 9 mm conversion. Reading the information regarding TK I decided to roll the dice and have the work done there. I sent my cylinder to them just prior to Christmas week and as such figured I probably wouldn't see it until after the new year. Much to my delight they accomplished the work in 4 days turned it around and I received it on Christmas Eve. To say I'm very pleased is an understatement, the work that they done is stellar, the packaging is stellar, The overall experience is stellar. The quality of the moon eclipse they provided as part of the conversion unit work is stellar. I went out to the range on Christmas Day and could not be more pleased with the results. TK custom as my thanks and admiration and if you are considering this 9 mm conversion work I would highly recommend you contact them..

I was astonished by how quickly they got my cylinder, did the work and returned it! The return packaging was exceptional! They included five extra clips with my order! I installed my cylinder then took the gun to the range and it worked perfectly; it exceeded my expectations! Now I want to send them more of my revolvers for this excellent conversion!

The very best revolver service.

Outstanding superb, friendly service, quick turnaround true Patriot long live the republic🎚🇺🇸

TK customs has to be one of the best revolver smiths in the country! Sent a 686 for finish work, sight replacement and 9mm conversion. Absolutely flawless work! I can not recommend Eli and TKC enough. Here is a customer for life!

What a great place to deal with. The best at what they do, and they do it fast and with great service

Can’t say enough about Eli and the crew over at TK Custom. My GP100 moon clip conversion turned out awesome.

Great Products and very helpful people. If you are on the fence about ordering from this company don't hesitate. The trigger and springs really helped the trigger pull on my S&W Model 19-4. I will definitely order again. Thank you

Cylinder Chamfering for S&W 929. Absolute true professionals! Work performed on my 929 cylinder is top notch. Chamfered cylinder is smooth and polished. Moon clips load in easily and fall out effortlessly without using ejector rod.

Fast and friendly service! Will use again in the future.

To begin, I have never had any work done on my arms where I had to send out a part to be worked on. TK Custom was able to give me a worry free experience when submitting the work order. Like the site says, a two week wait was expected and I received my cylinder in a pristine box with a extras thrown in for free! The quality of the machining is as if it came from S&W itself, everything was extremely polished and slick, my cartridges slip into each chamber with ease. With the Moon Clips, reloading is made even easier, I was able to just drop my clipped cartridges into the cylinder and they found their way into their slots. I know in the future I will be back for more custom work done on my Model 629 as soon as I can afford the extremely well worth tuning!

The guys at TK custom are awesome! They have fast work, fast returns, and great prices!

Best work and it’s always done in a timely manner!

Excellent service. They have customized three revolvers for me. Triggers are absolutely awesome! i WOULD USE THEM AGAIN AND AGAIN!!!

TK Custom is an excellent company for your firearm accessory needs. I’ve relied on them several times for some cutting edge parts and they’ve got them and ship them quickly. Their prices are spot on and I look forward to doing business with them frequently. With so many choices out there TKC is my one stop shop.

Even better than expected! Tk custom is well known for the quality of their work and I was still blown away. The trigger is excellent and the cylinder honing makes reloading stupid simple. Customer service was excellent and the package that’s included shows a level of pride and care.

Eli went above and beyond to take care of my Smith & Wesson upgrade. What a great company!

TKcustom is a class act. I recently sent them a cylinder to be machined for moonclips. I ordered additional clips and an install and removal tool. They went above and beyond with a quick turnaround and even threw in some extras no charge. Their service and packaging were first class, I highly recommend them as competent gunsmiths are hard to find nowadays!

I want to say how pleased I am with TK Custom products and their customer care. With that said, I recently purchased 10 moon clips for my Ruger SP101. I received the clips very quickly. I had problems loading the clips as they are very tight. I called the company, and they were very helpful and suggested I purchase the loader for the moon clips, I was also told they were going to send me 3 split moon clips to see if this would help. So, I decided to bite the proverbial bullet, and I ordered the loader. I received the clips within a week; however, the loader did not come in a second order. In checked with USPS, as the tracking only showed the package in transit, and it would be late, the last update was on 10-27-2024. As of today, I have not received the loader, so I called TK Custom customer service. After a few minutes of speaking with the customer service representative I was told a new loader would be sent and should arrive within a week. I have been taken care of very well. I know some of TK Custom products are a little pricy, but the products are very well made and well worth the cost. I cannot put a price on the customer care I have received. I highly recommend TK Custom and their products. God Bless your company and God Bless the USA...

Great workmanship. They exceeded my expectations for milling, and the care they took in packaging and shipping. I definitely recommend and will purchase again.

I bought a SW 327 PC ($1600 revolver!) that came with moon clips. They were a pain in the you know what to load due to the cases (8 of them) hanging up on the cylinder while trying to insert. So much for a fast reload?! I also wanted more moon clips and the right tools to make loading and unloading them POSSIBLE!. Turns out TK Customs produces the supplied moon clips that came with the revolver. They also make the BEST tools you can buy to do the loading of them! Want to know the BEST part? They also do what Smith and Wesson should have done which is chamfer the mouth of the cylinders to solve the insertion issue I described before! To top it off they did it reasonably, professionally and FAAASSSTTT! Delivered in a pretty box with a bunch of swag! These guys are friggin’ AWESOME! If you need help with your revolver, these are the guys. Did I say they are the BEST? Thanks guys, I’ll be back.